Hard-to-find size ~ new on cards!
(10) BARD'S 8-10" HANGERS
Hang plates, trays, tiles, platters, molds, stiff-backed photos/art and more!
10 Hangers + 10 Nails + 10 Wall Mounts
Quality brass plate finished to resist tarnish.
Prong ends covered with clear vinyl to protect item being hung.
Prong hooks accept an edge about 1/4” thick and could be
re-shaped (using needle-nose pliers) to hold a slightly deeper edge.
DIMENSIONS OF 8-10" HANGER:
Distance between prongs (at each end) is about 3-inches.
Without stretching springs, hanger height is about 6.5 inches.
SELECTING CORRECT SIZE
Since the hanger fits on the BACK of the item, use FLEXIBLE tape
to MEASURE from top edge to bottom edge ACROSS BACKSIDE.
The BACK MEASUREMENT includes depth and curve
and is almost always greater than the diameter across the front.
Compare the BACK measurement with hanger dimensions above.
When BACK measurement approaches upper limit
of a hanger size, the next larger size is
usually a safer, more comfortable fit for the item.
Our measuring instructions do not constitute a guarantee.
However, buyer’s careful use of our information should result in a good fit.
Comparing with other hanger sizes may also be helpful.
Bard's hangers attach from the back of the item being hung. Only the 4 curved
prong ends (that hook securely around the edge) show from the front.
We've sold BARD'S products since 1992 and
we are confident that you will appreciate the quality!